Shikabashi

電腦於昨天停電時關閉
今天打開SPINE後要綁定物件時 一綁定物件就偏移了
重新安裝軟體也一樣 其他檔案也有一樣問題
不知道有沒有人遇過相同的情況 謝謝!

---

軟體重新安裝,更換版本,鎖定圖片等等方法都嘗試過了
Shikabashi
  • Postovi: 11

Misaki

我很遗憾听到断电迫使你的电脑关闭。
让我确定一下你的问题。你所写的对象绑定是指设置父体吗? 或者将网格附件绑定到骨头上,以便设置权重? 如果是后者,当你选择网格并按下 "重置 "按钮时,你能看到它是否转移了位置? 如果是这样,你对网格做了一些无意的改变,可能会导致你在绑定时出现问题。

---

I'm sorry to hear that the power outage forced your computer to shut down.
Let me make sure of your question. Does the object binding you are writing about mean setting parent? Or binding a mesh attachment to bones in order to set the weights? If it's the latter, can you see if it shifts position when you select the mesh and press the "reset" button? If so, you have made some unintentional changes to the mesh, and it might cause the problem to shift when you bind it.
Avatar
Misaki

Misaki
  • Postovi: 763

Shikabashi

是後者,我按了重製也是沒有用。
另外其他的任何檔案,或是開啟新檔,新增圖片去做相同的綁定程序也會有一樣的問題。
不知道是不是停電影響,影響到硬體進而影響軟體,以前我從未遇過這樣的問題。

---

我剛剛做了很多測試,包括更換電腦,使用不同帳號測試。
都有相同問題,所以排除掉停電的影響可能。
-
然後剛剛發現是版本的問題,我平時是用4.0.56
但可能今天開電腦時軟體有自己更新到4.0.57
所以我剛才用兩台電腦兩個帳號做測試,使用4.0.57版本就會有這樣的偏移問題
(問題影片我附在這邊: https://drive.google.com/drive/folders/10T9X5Kt6eVH_Q8ZlC3sdUFsD6fzN7o2W?usp=sharing )

目前使用4.0.56沒有問題了。

另外SPINE裡面輸入數值時會系統會重覆輸入
例如:輸入50 後面會跳很多個0出來

麻煩再做版本修正了~感恩

2022/01/18
Shikabashi
  • Postovi: 11

Misaki

谢谢你的详细报告。你的视频对确认重现步骤很有帮助。显然,当一个网格被绑定到其父级以外的骨骼上时,会对绑定的网格的旋转和平移产生奇怪的影响。我们将立即调查并解决这个问题,但同时,如果您能使用4.0.56版本,我们将非常感激。

---

Thank you for your detailed report. Your video was very helpful in confirming the reproduction steps. Apparently, when a mesh is bound to a bone other than its parent, it has a strange effect on the rotation and translation of the bound mesh. We will investigate and fix this issue immediately, but in the meantime, we would appreciate it if you could use 4.0.56.

---

I created an issue for this on GitHub:
https://github.com/EsotericSoftware/spine-editor/issues/624

---

We've fixed the binding problem in 4.0.58 and it has been released. Please update your Spine editor and check if the issue is solved.
Avatar
Misaki

Misaki
  • Postovi: 763

Shikabashi

十分感謝!
Shikabashi
  • Postovi: 11


Natrag na 中国Spine用户